Peanut Butter Fudge (Microwave Recipe, 4 Ingredients!) (2024)

FAQs

Why won t my microwave fudge set? ›

Fudge Didn't Set

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

Conversely, if the cooking time is too brief and there is not enough evaporation, too much water will remain and the fudge will be too soft. A temperature of 112°C to 114°C (234°F to 237°F) must be maintained. This will ensure the fudge has the ideal concentration of water and sugar.

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

You can look up multiple ways to melt peanut butter, but sometimes you just don't have time to use a stove or have the energy to whisk it until your peanut butter becomes liquid. Taste Insight explains that you can just throw your peanut butter into the microwave to make it melty.

OPTION 1) Depending on how runny it is, you can either use it as a frosting for cakes, or a sauce for ice-cream. OPTION 2) Freeze it overnight. Cut it into squares. Cover each square thickly in melted chocolate, ensuring no part of the fudge is exposed.

Tiny microcrystals in fudge are what give it its firm texture. The crystals are small enough, however, that they don't feel grainy on your tongue, but smooth. While you ultimately want crystals to form, it's important that they don't form too early.

Homemade Fudge Doesn't Always Set

If your fudge doesn't firm up after a few hours, you either have too high an amount of liquid to sugar, or your mixture hasn't reached the soft-ball stage. Using a candy thermometer can help home cooks avoid this problem.

If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream. Stir the fudge as it heats, but only until the sugar in the chocolate is completely melted again.

Why does peanut butter spark if you put it in a microwave? Did you put the whole jar in the microwave? If so, it's probably the metal in the label that is sparking. What are some recommended ways to use thinly-sliced ribeye at home?

Just be sure to place SKIPPY^® Peanut Butter in a microwave-safe container. SKIPPY^® Peanut Butter jars, however, can't go in the microwave or oven.

Why did my sausage spark in the microwave? ›

"Arcing," according to the Canadian Food Inspection Agency, usually happens with foods that contain high amounts of minerals, including iron, magnesium, and selenium. Since those minerals act like "tiny pieces of metal," microwaves bounce off them just like they would a fork, causing the sparking effect.

Solutions to Save Your Fudge:

You can start by gently reheating it and boiling or cooking it again, aiming to reach the correct temperature. Alternatively, using short bursts in the microwave and stirring between intervals until it thickens can also be an effective method to restore its texture.

We like to set this fudge in the freezer to make it quicker! Once you add the fudge to your pan it will need just 30 minutes in the freezer to set.

The ratio of chocolate to condensed milk needs to be just right, otherwise you might end up with fudge that is too soft or too hard. Do not freeze the fudge to set it. Best way is to just be patient for a couple hours and set it in the fridge. If your fudge hasn't set, then you've gone wrong somewhere else.

Sure! You can freeze this microwave fudge for up to six months. Flash freeze the squares for a few hours or up to overnight, then transfer them to a freezer-safe container. Thaw in the fridge.